The Tudor Heritage Chrono, popularized by footballer great David Beckam, was developed in the early 1970’s and is built on a calibre 2892 engine with an additional mechanism for chronograph function. It has a power reserve up to 42 hours and has a screw down crown with Tudor logo and a waterproof system up to 500 feet. The bezel is made out of 12 hour graduated steel for second time-zone display.
It has two screw down pushers at 2 o’clock and 4 o’clock, a 45-minute totalizer at 9 o’clock on the dial and a small seconds hand at 3 o’clock on the dial. The date window appears at 6 o’clock. The Sapphire crystal has a cyclops lens at 6 o’clock to give better viewing to the date. The case is 42 mm and is made out of steel with a polished satin finish.
This unit is available with a dial in both black and grey, grey and black or blue and Opaline. The blue Reference: m70330b-0001 comes with both a steel and a blue and orange fabric strap. The Black/Grey Reference: m70330n-0002 comes with a Black and orange fabric strap in addition to the steel bracelet. All three watches retail for about $4,400 new.
Rubber B has 4 replacement bands for the Tudor Heritage Chrono. Rubber has replacement bands in Tudor jet black, black/pacific blue, black/ arctic white and black/sahara tan. Each are made with Vulcanized dual colored rubber and are engineered to fit the Tudor Heritage Chrono 42mm. All Rubber B bands are Made in Switzerland and contain no coating, blends, glues or bonding.
These bands have a universal fit for wrist sizes XXS – XXL ( 5 1/2 – 9 inches). All Rubber B bands meet FDA and BVGG specifications since they are non-toxic, non-marking, non-allergenic and they do not attract dust. For more information go to our Tudor Heritage Chrono replacement watch band page.
